Hi. i'd like to reverse (i.e. front to back) the dovetail mount on this guide scope but haven't figured out how to do so assuming that it's possible at all. This will allow me to move the guide scope forward on my OTA to help with balancing. I removed the two small set screws but that didn't free up anything. I did note that there are threads on the OD of the scope stock just behind the back end of the mount stock. Makes me wonder if I can unscrew the scope from the mount after removing those set screws and, if so, it I'll be able to screw it back in after reversing the mount? Any help will be appreciated.