Hi everyone
I'm at a loss here. I 've had for years an ASI1600mm riding piggyback to the C-14 Edge HD and attached to a William Optics 61mm with the filter wheel. Yesterday the computer stopped connecting to it. I removed and replaced ALL ZWO drivers and ASCOM platform and the device manager reacts BUT it won't recognize it, I changed the cable..nothing.. I have a second ASI 1600 so I connected it to the computer and nothing. I used every usb port and powered hub available and nothing...I connected an ASI120 to the computer and it recognized it right away, I then connected the TWO ASI 1600mm to a second computer to see if the cameras were faulty and both work fine. ....the SBIG camera, the sti camera work fine all the usb connections are operational...
I'm at my wits end...the ONLY thing I did differently was to scan the computer with a "driver booster" but any changes performed by that softwre should've been fixed by reinstllingall the Ascom drivers, EFW drivers,ASI drivers. right?
Thoughts?
Pablo Lewin
The Maury Lewin Astronomical Observatory