SGPro camera sttings

ASI's Range of Specialised CMOS camera's

Moderators: Sam, Sean.Wang

Post Reply
Posts: 1
Joined: Wed Jan 03, 2018 1:54 am

SGPro camera sttings

Post by hdman1 » Sat Mar 16, 2019 3:02 pm

I own an ASI178MC Cooled, recently I obtained SGPro and have come up against a setup issue. In the camera setup window you are required to use two pull downs and enter Gain(value and e-/ADU).The authors suggest obtaining these from the manufacturer. Any suggestions or basic settings to go with?

User avatar
Posts: 498
Joined: Thu Feb 09, 2017 4:58 am

Re: SGPro camera sttings

Post by chad » Mon Mar 18, 2019 3:00 am

Can you show us where it is with the screenshot?
Usually, this value could be obtained by the software, there is no need to enter.
ZWO Driver Engineer
Location:lon=120.6 lat=31.3
SuZhou China

Post Reply