avalon stargo

Astrophotography has never been easier

Moderators: yang, Sam, Ji.zwo, lancer jiang

Post Reply
Posts: 1
Joined: Sat Jul 20, 2019 10:40 am

avalon stargo

Post by manu » Thu Aug 15, 2019 2:56 pm


I need help, my stargo is not recognized by asiair. (mount M-zero)
message : connect failed

I connect directly asiair to stargo using usb to usb because there're not rs232 port on stargo
speed 9600 baud, i try other, same problem
i try with lx200 protocol same problem
asiair v1.2.1 firmware 2.64

i've read that the connection on Indi is only with usb-usb cable, if asiair use indy librairy, it should be same ?

best regard, 谢谢


lancer jiang
Posts: 71
Joined: Mon Nov 26, 2018 9:59 am

Re: avalon stargo

Post by lancer jiang » Fri Aug 16, 2019 7:27 am

Hi Emmanuel

Have you tried on Ekos or MDL5.

The connection should be correct. have a try on 115200 baud or some baud

https://www.facebook.com/search/top/?q= ... 0ifQ%3D%3D

Post Reply