I'm somewhat frustrated by the current design on the EOS - T2 lens adapter. The release pin feels like can break at any moment when trying to release the lens. In addition, the 4 screws holding and adjusting tilt are not uniform from lens to lens. Some lens go in totally smoothing, while others are virtually impossible to get on the adapter. There seems to be no consistency. I'm past the return date at High Point, but this really has been very frustrating as I mentioned. There seems to be no "guide" as to how much is too tight or too loose, or how to calibrate so we know there is no tilt being introduced. Really could use some help all around..
Thanks in advance..