ASIAIR Pro plate solving inop

Astrophotography has never been easier

Moderators: Sam, Tech@ZWO, ASIAIR@ZWO

Posts: 6
Joined: Fri Jun 19, 2020 5:02 pm

Re: ASIAIR Pro plate solving inop

Post by DJA777 » Thu Jul 02, 2020 1:28 am

I haven’t tried the guide scope plate solving. I can test that on my CEM26P to see what it does. I’ve had no response yet from ZWO. It was going to do a second plate solve after slewing to the target. It never solved anything since. It has barely been used since I got it. It’s that new. I’ve got the WO GT71 piggybacked on the LX200 so I can switch around and use APT to do plate solving for reference.

User avatar
Posts: 603
Joined: Tue May 29, 2018 3:29 am

Re: ASIAIR Pro plate solving inop

Post by ASIAIR@ZWO » Thu Jul 09, 2020 9:22 am

Have you checked the FoV of your setup? And please try enter ZERO in the FL box, let the ASIAIR do the blind solving to cacl the real FL.
ZWO | ASIAIR Support
Location:lon=120.6 lat=31.3
Suzhou China

Post Reply