ASIAir Pro native support of Astromechanics ASCOM Canon lens controller, please

Moderators: Sam, Sean.Wang

Post Reply
a.cidadao
Posts: 7
Joined: Tue Jan 14, 2020 1:45 pm

ASIAir Pro native support of Astromechanics ASCOM Canon lens controller, please

Post by a.cidadao » Thu Jan 16, 2020 10:38 am

I previously posted this request in a different place, sorry... I belongs here.

I have an ASIAIR Pro on order (from Germany), and I would like to request that the Astromechanics ASCOM Canon Lens Controller Mark II (also ordered and arriving soon) is added to the list of devices which have native support by ZWO/ASI (specifically through ASIAir Pro).

Directly allowing both focus and diaphragm control of Canon lenses attached to ASI cameras, that is without intermediate parts (e.g. belts or adaptors) its capabilities are non-overlapping with the current ASI focuser (which is excellent for telescopes), and would maximize the "universe" of potential ASIair users and ASIair field of use.

Link (for description and communication protocols): https://astromechanics.org/ascom.html

Thanks in advance

António

Katherine.Tsai
Posts: 481
Joined: Fri Dec 07, 2018 10:24 am

Re: ASIAir Pro native support of Astromechanics ASCOM Canon lens controller, please

Post by Katherine.Tsai » Fri Jan 17, 2020 10:24 am

Thanks for your feedback, sorry we do not support this in near future but I will convey your message to our devs.

a.cidadao
Posts: 7
Joined: Tue Jan 14, 2020 1:45 pm

Re: ASIAir Pro native support of Astromechanics ASCOM Canon lens controller, please

Post by a.cidadao » Fri Jan 17, 2020 3:32 pm

Thank you.

António

Post Reply