Celestron CGX-L and ASIAIR

Astrophotography has never been easier

Moderators: Sam, Tech@ZWO, ASIAIR@ZWO

Post Reply
dirkeb
Posts: 1
Joined: Fri Oct 04, 2019 5:11 pm

Celestron CGX-L and ASIAIR

Post by dirkeb » Tue Oct 08, 2019 8:06 am

Hi,

I`m using the celestron CGX-L and a smal Ioptron ZEQ25 with the AsiAir and Ipad. The setup with the Ioptron works great. With the Ioptron I have the opportunity for directly control the mount via the app and also to adjust the movement speed. I do not have this option with the CGX-L. If I want to intervene there I have to do that via the hand controller. Is there a solution for the problem?

Using SkySafari Pro and IOptron ZEQ25 the Ioptron responds with a delay of up to 30 or 40 seconds on control commands via SkySafari. Where could the problem be here? Software is up to date everywhere.

Best regards from Germany
Dirk

Tech@ZWO
Posts: 132
Joined: Mon Nov 26, 2018 9:59 am

Re: Celestron CGX-L and ASIAIR

Post by Tech@ZWO » Wed Oct 09, 2019 11:43 am

HI Dirk:

Using SkySafari Pro and IOptron ZEQ25 the Ioptron responds with a delay of up to 30 or 40 seconds on control commands via SkySafar

=>Try to control the ZEQ25 by Asiair at the moment


I have tested SkySafari Pro 5 on Vixen starbook Ten and Skywatcher AZ-GTI,there is no delay.

Post Reply