ASICAP - delay setting between taking images

MartinGoedbloed · Post by **MartinGoedbloed** » Tue Aug 06, 2019 6:49 am

Hi,

Just started to use the ASICAP software for making images from my ASI120MC camera.
I am primairly using the camera for night recording (clouds / meteors / etc.), hence i take pictures all night long.

I've noticed, that when starting the capture, the program makes pictues at a very high rate, up to 3 images / second, which is overkill for my application.

It would be great, to take a picture every ie. 2 seconds, but I haven't found a 'delay' function between taking pictures on the ASICAP program, if that parameter can be added in the next version, that would be awesome.

Gt's

Martin

walkfaraway · Post by **walkfaraway** » Mon Aug 19, 2019 3:49 am

You can implement this function in ASICAP v1.6.1.

Press the autorun button

: autorunbutton.png (2 KiB) Viewed 250 times

Refer to the image below to set your capturing parameters.

Thank you.

MartinGoedbloed · Post by **MartinGoedbloed** » Mon Aug 19, 2019 12:26 pm

Hi,

When using the 'foto' functionality, all the 'auto' settings (exposure / whitebalance / rgb / etc. / etc. ) are still available / used.

When making pictures using the 'auto-run' option, all that's not available, and the app. falls back to manual settings, which results in poor pictures, due to the changing light conditions over several hours.

If only there was a input field, with a adjustable delay period between pictures.... then I wouldn't generate 2tb of data each day

But, thanks for pointing out a possible option,

Gt's

Martin