Page 9 of 11

Re: ASIAIR User Feedback

Posted: Wed Oct 09, 2019 12:32 pm
by newty
hi
FRANCE(sorry for my bad english)
samsung TAB 7
nexstar evolution wit or without wedge
canon eos 750D or eos 70D

all work fine (connect , guiding etc ....)
but .....

fot the same target
1==> with asiair connect
canon (preview and more with ....focus !!!! throug asiair) is awful too worst

and i do the same (exactly the same ) with backyard eos via usb
or eos utility via usb or ....

Android dslr controler via USB (eos ===samsung tab)
the result is perfect


why throug asiair its so badddd ????

the apps itself with zwo 224 (main) its very good
but i have tried with other device
as samsung tab 10 , s6
same result and can't use .....the "focus screen")

great thanks

Re: ASIAIR User Feedback

Posted: Fri Oct 11, 2019 7:55 am
by Ji.zwo
newty wrote:
Wed Oct 09, 2019 12:32 pm
hi
FRANCE(sorry for my bad english)
samsung TAB 7
nexstar evolution wit or without wedge
canon eos 750D or eos 70D

all work fine (connect , guiding etc ....)
but .....

fot the same target
1==> with asiair connect
canon (preview and more with ....focus !!!! throug asiair) is awful too worst

and i do the same (exactly the same ) with backyard eos via usb
or eos utility via usb or ....

Android dslr controler via USB (eos ===samsung tab)
the result is perfect


why throug asiair its so badddd ????

the apps itself with zwo 224 (main) its very good
but i have tried with other device
as samsung tab 10 , s6
same result and can't use .....the "focus screen")

great thanks
Hello newty,
If you can take some screenshots and post, it would be very helpful. The 750D or 70D DSL, we have been tested them and works good.
Thank you.

Re: ASIAIR User Feedback

Posted: Fri Oct 11, 2019 8:04 am
by Ji.zwo
Jovax wrote:
Tue Jul 30, 2019 9:51 am
Dear team Zwo

The preview is very slow, take more them 5 sec to see a preview of a 1 sec expose, I was inform was fixed in 1,2 update, but is still the same,

Pls fix :)

Regards
John
There are two reasons, one is: maybe you are using the 2.4Ghz WiFi bandwidth. Second is: The camera frame is very large which means the image size (in RAW format) is very large either. So the downloading took more time.
You can try to use BIN4 to upper the loading spd.

Re: ASIAIR User Feedback

Posted: Fri Oct 11, 2019 8:10 am
by Ji.zwo
keano wrote:
Tue Aug 27, 2019 8:21 am
Please update names stars with english names shown on the mount GOTO page.
Hello Keano,
In v1.3, the name of target now can be seen with the mount control pad.

Re: ASIAIR User Feedback

Posted: Fri Oct 11, 2019 8:14 am
by Ji.zwo
Mtomko wrote:
Sat Sep 07, 2019 11:27 am
Revisions requested:

Just ordered a second ASIAIR so that I can have dedicated units for both of my telescope rigs. The ZWO products are great and the continuous improvement mindset of the ZWO team is appreciated. I’d like to see the following two feature enhancements made to the next revision of ASIAIR software:
1: Star lost alarm: the ability to set an audible alarm to alarm users when the guide Star has been lost for an amount of time determined by the user.
2: Exposure/imaging time: in addition to the preset times, it would be useful to allow users to have the ability make the exposure time variable and set their own numeric value. This would be very helpful especially for improving the ability for producing flat frames.

Thank you in advance for your consideration.
Mike
Hello there,
#1 Added to the to-do list. But need more time to make it.
#2 In Autorun Mode, you can customize the exposure time. Just tap the icon near the exp drop list box in Autorun Settings page.

Re: ASIAIR User Feedback Named objects

Posted: Fri Oct 11, 2019 8:17 am
by Ji.zwo
Rrosenberg8 wrote:
Mon Sep 23, 2019 9:25 pm
The named objects feature is very useful. One addition is more named stars! Many of the iOptron alignment stars are not in ASIAir's list. It would be slick to align the mount (I think) using iOptron's 3 star alignment system using the plate solving of ASIAir. I'm not sure how many stars iOptron uses, I'd guess all 2nd Magnitude and above. I could send the list of numbered stars at the end of their manual if that would be helpful.
It's also possible the names are spelled differently. A list similar to what's done with objects would be helpful, even better limiting them to what is visible at the current location and time.
Also, the named objects (I think) omits planets - that would be a nice addition.
Overall the ASIAir works very well with the iOptron CEM40. The documentation is very good it just needs to be read and followed :)
Thank you for your info. Yes, in the new version, the category list data was optimized. You can try it in few days after the official release on this Sat.

Re: ASIAIR User Feedback

Posted: Tue Oct 15, 2019 5:39 pm
by FreemanZlat
Hi ZWO :)
I have ASIAIR and EFW with ZWO LRGB set which is not parfocal on my telescope. And I want to buy EAF.
Does ASIAIR have ability to set EAF position for each filter in EFW and move EAF to the desired position when filter changes?

Re: ASIAIR User Feedback

Posted: Wed Oct 16, 2019 2:48 pm
by newty
thanks a lot
all work for me
it was bin ..... 4 !!!


but but
why control Right , Left , up , down are INVERTED ????
(with Nexstar evolution )


i didn t found how to solve this issue

very great thank

Re: ASIAIR User Feedback

Posted: Fri Oct 18, 2019 3:35 am
by Ji.zwo
FreemanZlat wrote:
Tue Oct 15, 2019 5:39 pm
Hi ZWO :)
I have ASIAIR and EFW with ZWO LRGB set which is not parfocal on my telescope. And I want to buy EAF.
Does ASIAIR have ability to set EAF position for each filter in EFW and move EAF to the desired position when filter changes?
Not yet. But it's in the to-do list.

Re: ASIAIR User Feedback

Posted: Fri Oct 18, 2019 3:43 am
by Ji.zwo
newty wrote:
Wed Oct 16, 2019 2:48 pm
thanks a lot
all work for me
it was bin ..... 4 !!!


but but
why control Right , Left , up , down are INVERTED ????
(with Nexstar evolution )


i didn t found how to solve this issue

very great thank
The orientations depend on the reference.