Asiair ES Exos2 sync to mount not doing anything

Astrophotography has never been easier

Moderators: Sam, Tech@ZWO, ASIAIR@ZWO

Post Reply
bogdanirimie
Posts: 4
Joined: Wed Aug 21, 2019 4:08 pm

Asiair ES Exos2 sync to mount not doing anything

Post by bogdanirimie » Sun May 24, 2020 6:01 pm

Hi team,

First apology if this issue was reported before. Searched for it but couldn't find it.
Mount ES Exos2. Asiair 1.4.3. Firmware 5.05 the sync to mount button not performing any action.
The mount is switched to serial the right cable is used and the mount is detected only thing which is not working is sync to mount.

Please advise
Thank you.!

User avatar
ASIAIR@ZWO
Posts: 501
Joined: Tue May 29, 2018 3:29 am

Re: Asiair ES Exos2 sync to mount not doing anything

Post by ASIAIR@ZWO » Mon Jun 29, 2020 10:31 am

bogdanirimie wrote:
Sun May 24, 2020 6:01 pm
Hi team,

First apology if this issue was reported before. Searched for it but couldn't find it.
Mount ES Exos2. Asiair 1.4.3. Firmware 5.05 the sync to mount button not performing any action.
The mount is switched to serial the right cable is used and the mount is detected only thing which is not working is sync to mount.

Please advise
Thank you.!
Hello bogdanirimie, it's not a bug, the PMC-8 control system maintenances the Date & Time under the driver, so there is no need to do Sync. In the future we will remove the Sync btn under PMC-8 based mount.
ZWO | ASIAIR Support
Location:lon=120.6 lat=31.3
Suzhou China

Post Reply