Last firmware updates

Astrophotography has never been easier

Moderators: Sam, Tech@ZWO, ASIAIR@ZWO

Post Reply
Jovax
Posts: 22
Joined: Wed Dec 19, 2018 7:14 pm

Last firmware updates

Post by Jovax » Fri Mar 13, 2020 2:24 am

Last update just make Eq mode just stop work with sky safari 6 with Meade Lx200 classic , telescope setting “ Eqmod with sky safari” pls fix! was working perfect ,

User avatar
ASIAIR@ZWO
Posts: 487
Joined: Tue May 29, 2018 3:29 am

Re: Last firmware updates

Post by ASIAIR@ZWO » Fri Mar 20, 2020 10:11 am

Jovax wrote:
Fri Mar 13, 2020 2:24 am
Last update just make Eq mode just stop work with sky safari 6 with Meade Lx200 classic , telescope setting “ Eqmod with sky safari” pls fix! was working perfect ,
Please check
#1 the port on SS. It should be 9624.
#2 Did you in STA mode, if so, the IP Address should be the diff on AP mode, you can get the IP Address in ASIAIR App: ASIAIR Settings - WiFi Station Mode or Settings - Wired Ethernet.
ZWO | ASIAIR Support
Location:lon=120.6 lat=31.3
Suzhou China

leshigginsq
Posts: 11
Joined: Sun Aug 25, 2019 5:42 pm

Re: Last firmware updates

Post by leshigginsq » Fri Apr 10, 2020 2:22 pm

So, are you saying that the Port 4030 setting (as stated in the manual) no longer works?

Should it be Port 9624?

I'm using Galaxy Tab A, ASIAIR (refreshed), SkySafari Pro 6 (refreshed), NEQ6 Pro mount, Lynx USB/serial cable.

leshigginsq
Posts: 11
Joined: Sun Aug 25, 2019 5:42 pm

Re: Last firmware updates

Post by leshigginsq » Fri Apr 10, 2020 3:33 pm

So, I just tried Port 9624 and it seems to be working.

Now, here's my BIG question - much as I love what ZWO has been doing, why do you think it's OK to change fundamental settings like that without letting your customers know?

It should not be down to your customers searching the forums to do what is simple Quality Assurance and Customer Service!

PLEASE get your documentation sorted out and keep it updated!

This issue has cost me two nights of good observing time!

Les.

W7AY
Posts: 225
Joined: Fri Jan 25, 2019 3:38 am
Location: Portland, Oregon, USA

Re: Last firmware updates

Post by W7AY » Fri Apr 10, 2020 5:36 pm

>> So, are you saying that the Port 4030 setting (as stated in the manual) no longer works?
>>Should it be Port 9624?

Most mounts have their own unique command protocol.

Ports such as 4030 and 9624 are simply IP or UDP ports on the ASIAIR where the ASIAIR listens to commands from a third program/device such as SkySafari.

Port 9624 is the proxy for the Meade LX-200 Classic protocol. That port number is used by many other astronomy programs, not just by SkySafari.

When ASIAIR connects to an EQMOD mount ("SkyWatcher Motor Controller command protocol") to talk to the mount, ASIAIR also translates the LX-200 commands that it receives on Port 9624 from SkySafari.

This is necessary because SkySafari has been trying unsuccessfully to get the native EQMOD protocol to work for many years (!) now. So, ZWO has included a Meade LX-200 proxy port and the ASIAIR translates the LX-200 commands into EQMOD commands.

Port 4030 is the proxy for iOptron, SynScan, and a couple other similar mount protocols.

If you select "EQMOD with SkySafari," ASIAIR listens only to the Meade LX-200 commands on Port 9624. It has always been that way. As far as I can tell from my mount simulator, in "EQMOD with SkySafari," ASIAIR does not listen to the proxy at Port 4030.

Chen

MichaelBut
Posts: 1
Joined: Mon Apr 06, 2020 8:32 am

ciara and kim kardashian best friends

Post by MichaelBut » Sun Apr 12, 2020 6:39 am

compte instagram officiel de rihanna <a href="https://metropolitanmule.com/cahykifoq.php">compte instagram</a> officiel de rihanna https://metropolitanmule.com/cahykifoq.php
ferrari 458 italia white justin bieber ferrari <a href="https://tsinmanlaw.com/">458</a> italia white justin bieber https://tsinmanlaw.com/
m9iftvyy59v4nsi15vk77p75
justin bieber eenie meenie video download <a href="https://sriyoutube.com/xovodexeby.php">mp4</a>

Post Reply