Issue vithe Celestron AVX

Astrophotography has never been easier

Moderators: yang, Sam, lancer jiang, Ji.zwo

Post Reply
taipan
Posts: 8
Joined: Sun Apr 08, 2018 12:32 pm

Issue vithe Celestron AVX

Post by taipan » Fri Aug 30, 2019 9:06 am

Is there some issue vith he ASIAIR and The Celestron AVX mount? I connect with the usb-serial to handcontroller cable.
i chose the Celestron AVX(and more) alternative i the menue but i cant se the info and database and so on in ASIAIR under "mount".
I can controll the mount with skysafari so all the cables ar connected as they should. Newest firmware in the handcontroller.
I havn't tryed outside yet so dont know if guiding and PA are working...

lancer jiang
Posts: 120
Joined: Mon Nov 26, 2018 9:59 am

Re: Issue vithe Celestron AVX

Post by lancer jiang » Fri Aug 30, 2019 9:22 am

Hi

hope the steps helps

1.mount->Nexstar hand controller USB mini B port-> ASIAIR USB port.
Choose serial port, baud rate 9600.


i searched in our Facebook groups,get many feedback of the AVX users,
The guiding and PA should be fine with Asiair
https://www.facebook.com/search/top/?q= ... 0ifQ%3D%3D

taipan
Posts: 8
Joined: Sun Apr 08, 2018 12:32 pm

Re: Issue vithe Celestron AVX

Post by taipan » Fri Aug 30, 2019 2:34 pm

i use the cabel with the RS232 adapter. On facebook there are some others with the same problem, thats why i asked if there was an issue with the new firmware on ASIAIR.

Post Reply