questions or suggestion about ASICAP software
Moderators: Support@ZWO, Software@ZWO
- Posts: 2
- Joined: Sun Oct 14, 2018 12:11 pm
I'm using ASICAP on my MAcBookAir (HighSierra) width an ASI 174 MMC and it works fine so far, but at exposure times of 300s (200 gain) I get white images, that look show overexposure.
Any suggestions on that?
- Posts: 95
- Joined: Tue May 09, 2017 5:52 am
- Location: lon=120.6 lat=31.3
Hi, please make dark frame at exposure times of 300s (200 gain) and to see if the image is white. And lower the exposure time (eg. 10s) to see if the image is white. Thank you.
ZWO Software Engineer