TheSkyX X2 driver is not working

any question related to our SDK and driver

Moderators: yang, Support@ZWO

Post Reply
maxmirot
Posts: 2
Joined: Sun Mar 31, 2019 5:40 pm

TheSkyX X2 driver is not working

Post by maxmirot » Tue Jun 16, 2020 5:18 pm

I have the ASI 6200.

I downloaded the latest X2 driver for TheSkyX, version 2.9.

This driver causes TheSkyX to crash after 20- 30 minutes.
Windows gives a message the the application has stopped working and then will close after clicking the message.
It still crashed TheSkyX even when the camera is not connected!

I reinstalled the system with version 2.7 driver and this behavior stopped. It is now stable
Unfortunately, 2.7 won't will connect to the camera but cannot download images with the 6200.

I tried the ASCOM driver. The ASCOM driver is stable but gets frequent com errors when using 1x binning.
Bin 2x works ok.

I am using USB3 without a hub.

TheSkyX X2 need to be fixed.

Also, the ASCOM driver should not get comm errors on bin 1x.

Thanks

Max

Tech@ZWO
Posts: 132
Joined: Mon Nov 26, 2018 9:59 am

Re: TheSkyX X2 driver is not working

Post by Tech@ZWO » Wed Jun 17, 2020 9:49 am

Hi max

Would it be convenient for you to test on the ASIstudio

The crash may caused by (software)Out Of Memory rather than the X2 driver itself

support@zwoptical.com

Post Reply