EFW Ascom driver does not remember choice of EFW

any question related to our SDK and driver

Moderators: yang, Support@ZWO

Post Reply
buckeyestargazer
Posts: 16
Joined: Wed Feb 15, 2017 2:23 am

EFW Ascom driver does not remember choice of EFW

Post by buckeyestargazer » Sat Jun 06, 2020 2:31 pm

I have two ZWO filter wheesl (7x50mm and 7x36mm). I'm using using the ASCOM driver with SGP for image capture. I run a tandem scope/camera setup.

In SGP I choose the EFW for each scope. For the second scope, I choose EFW(ID1). The problem is that this choice is not remembered after saving and closing SGP. So each time I have to manually choose the correct EFW, otherwise the two scopes will be trying to use the same filter wheel [EFW(ID0)].

I'm not sure if this is a ZWO ASCOM driver issue or SGP, so I'm posting in both forums.

Thanks.
joel

User avatar
Software@ZWO
Posts: 88
Joined: Tue May 09, 2017 5:52 am
Location: lon=120.6 lat=31.3

Re: EFW Ascom driver does not remember choice of EFW

Post by Software@ZWO » Tue Jun 09, 2020 10:29 am

I'm sorry that we cann't remember the choice of EFW at the present. We will try to solve the problem.
Mouling Song
ZWO Software Engineer
Location:lon=120.6 lat=31.3
SuZhou China

Post Reply