Search found 120 matches

by lancer jiang
Tue Oct 22, 2019 8:54 am
Forum: ASIAIR
Topic: Mount ASCOM driver installation
Replies: 5
Views: 132

Re: Mount ASCOM driver installation

Hi sir If you want to change the interface from the default WiFi Port (interface 1) to the Serial Port (interface 0), do the following: NOTE: This assumes that you start with the delivered configuration of the PMC-Eight™ with the WiFi interface enabled. 1. Set your SSID to the PMC-Eight-xx, whicheve...
by lancer jiang
Wed Oct 09, 2019 11:54 am
Forum: ASIAIR
Topic: Orion atlas using EQdirect cable
Replies: 1
Views: 158

Re: Orion atlas using EQdirect cable

Hi
I heard The Orion Atlas EQ-G is the same mount as the EQ6 Pro.

So you can connect it to Asiair by EQmod directly.

The all function is supported by Eqmod connection,including the polar align,"tonight best",plate solve and guiding and so on
by lancer jiang
Wed Oct 09, 2019 11:43 am
Forum: ASIAIR
Topic: Celestron CGX-L and ASIAIR
Replies: 1
Views: 65

Re: Celestron CGX-L and ASIAIR

HI Dirk:

Using SkySafari Pro and IOptron ZEQ25 the Ioptron responds with a delay of up to 30 or 40 seconds on control commands via SkySafar

=>Try to control the ZEQ25 by Asiair at the moment


I have tested SkySafari Pro 5 on Vixen starbook Ten and Skywatcher AZ-GTI,there is no delay.
by lancer jiang
Wed Oct 09, 2019 3:54 am
Forum: ASIAIR
Topic: Skysafari connection delay
Replies: 2
Views: 165

Re: Skysafari connection delay

Hi

I tested on Skywatcher AZ-GTI (choose eqmod with SkySafari in Asiair telescope settings)with SkySafari 5 pro

there is no connection delay
by lancer jiang
Wed Oct 09, 2019 3:29 am
Forum: ASIAIR
Topic: Guiding and parking scope bug
Replies: 6
Views: 244

Re: Guiding and parking scope bug

HI Andrej

When enabled the dither on,the sequence would work follow the settings in dither
by lancer jiang
Tue Oct 08, 2019 8:36 am
Forum: ASIAIR
Topic: Canon RP - Nikon Z6
Replies: 1
Views: 75

Re: Canon RP - Nikon Z6

Hi

Please pay attention to our official website and FB groups.
by lancer jiang
Tue Oct 08, 2019 3:15 am
Forum: ASIAIR
Topic: StarSense on Skywatcher EQ6-R Pro
Replies: 3
Views: 105

Re: StarSense on Skywatcher EQ6-R Pro

Hello

When connected by Eqmod,you do not need to connect to the HC,connect the EQmod directly.Select Eqmod In Asiair Telescope drop list
When connected by HC(synscan ),you need to choose the drop list as SyncScan or Synscan Pro in Asiair Settings
by lancer jiang
Sun Sep 29, 2019 9:44 am
Forum: ASIAIR
Topic: Celestron 5SE
Replies: 4
Views: 183

Re: Celestron 5SE

Hi

it seems the settings were OK
i did not get the Celestron 5SE,so can not take a verification on it

you can try to connect 5SE to MDL or kstar on pc
by lancer jiang
Sun Sep 29, 2019 9:15 am
Forum: ASIAIR
Topic: EQdirect cable or Synscan handset?
Replies: 2
Views: 177

Re: EQdirect cable or Synscan handset?

Which method would be best and most problem free in terms of compatibility? can I use the EQDirect cable? Will it work with the Atlas? Both synscan(connected by HC)or Eqmo(directly connect) is ok for Asiair, With the handset i still have to do 3 star align, correct? Yes,when trying to connect the ai...