Search found 10 matches

by dwhite
Tue Aug 20, 2019 12:45 am
Forum: Cameras
Topic: ASI1600mm C camera cooling issue
Replies: 6
Views: 337

Re: ASI1600mm C camera cooling issue

After connecting the camera to a AC-DC 12 v converter the cooler maintained a good temperature.....
Thanks
by dwhite
Mon Aug 19, 2019 6:25 pm
Forum: Cameras
Topic: ASI1600mm C camera cooling issue
Replies: 6
Views: 337

Re: ASI1600mm C camera cooling issue

The temperature of the camera used to be consistent. Now it is not. Why is the temperature increasing when the current is constant? Your ASI 1600 MM C does not have a consistent temperature. I would like for SAM to look at this.
by dwhite
Sat Aug 17, 2019 1:33 am
Forum: Cameras
Topic: ASI1600mm C camera cooling issue
Replies: 6
Views: 337

Re: ASI1600mm C camera cooling issue

Hi, For testing purpose I had the ASI 1600 MM C camera sitting on table in the house ambient temperature of around 78 degree F. Set target temp = -15 degrees C 67 cooler power -14.7 degrees C 76 cooler power -14.6 degrees C 76 cooler power -14.6 degrees C 79 cooler power - 14.6 degrees C 89 cooler p...
by dwhite
Fri Aug 16, 2019 8:25 am
Forum: Cameras
Topic: ASI1600mm C camera cooling issue
Replies: 6
Views: 337

ASI1600mm C camera cooling issue

Over the last several months my ASI1600mm C camera has not been able to maintain consistence temperature. I tested the camera on my table in house using only my laptop and 12 v battery. Example: Using Sharpcap I set the cooling temp to -20 degrees. The censor temperature will reach approximately -18...
by dwhite
Wed Sep 20, 2017 5:12 pm
Forum: SDK & Driver
Topic: Using power data hubs with ASI120mm-S
Replies: 1
Views: 897

Using power data hubs with ASI120mm-S

I am upgrading to the ASI120mm-s camera for my guide scope after the ASI120MM gave me a lot of problems. I would like to reduce the number of data cables on the tripod by using a power data hub to connect to my computer. I have read a few comments regarding whether to use a power data hub with the A...
by dwhite
Mon Aug 14, 2017 1:42 pm
Forum: SDK & Driver
Topic: ASI120MM interface with new Windows 10 using Sharp Cap 2.9
Replies: 9
Views: 1936

Re: ASI120MM interface with new Windows 10 using Sharp Cap 2

Yes, if you look at my first post you will see that it works on an older computer. I bought a newer
Computer just to run your camera.
Again, Can you tell me the latest software version for the ASI120 mm camera. I want to make sure I am using the latest version.

Thanks again,
Richard
by dwhite
Tue Aug 08, 2017 2:29 am
Forum: SDK & Driver
Topic: ASI120MM interface with new Windows 10 using Sharp Cap 2.9
Replies: 9
Views: 1936

Re: ASI120MM interface with new Windows 10 using Sharp Cap 2

What is the latest software release for ASI120mm camera? Also is there a way to adjust USB traffic settings? I am still having problems with the ASI120mm camera on 8-13-2017. Can you tell me what is the latest software release for the ASI120mm. I have loaded Sharp cap 3.0 and still have problems. I ...
by dwhite
Fri Aug 04, 2017 2:55 am
Forum: SDK & Driver
Topic: ASI120MM interface with new Windows 10 using Sharp Cap 2.9
Replies: 9
Views: 1936

Re: ASI120MM interface with new Windows 10 using Sharp Cap 2

Hi,
Sharp cap V 2.9.30086.0 is loaded on my windows 10 computer
ASI software V2.0.1.5 is also loaded. Is this the latest software?
Should I connect ASI120MM to USB 2 or USB 3?

Richard
by dwhite
Thu Aug 03, 2017 3:12 am
Forum: SDK & Driver
Topic: ASI120MM interface with new Windows 10 using Sharp Cap 2.9
Replies: 9
Views: 1936

Re: ASI120MM interface with new Windows 10 using Sharp Cap 2

Thank you for your post.

Sharp Cap supports All ZWO cameras
I would like to use Sharp Cap 2.9 if possible since it does not cost me an annual subscription.

Thanks
Richard
by dwhite
Tue Aug 01, 2017 2:22 pm
Forum: SDK & Driver
Topic: ASI120MM interface with new Windows 10 using Sharp Cap 2.9
Replies: 9
Views: 1936

ASI120MM interface with new Windows 10 using Sharp Cap 2.9

3 weeks ago I purchased a New Dell Windows 10 laptop (Windows 10 home, version 1703, os build 15063.483, Processor I3-7100u CPU, 6 GB). When I connect my ASI120MM camera to Sharpcap 2.9 the application locks up. Even when testing the camera in the house it will lock-up. I tried both USB2 and USB3 ou...