Guiding settings for ZWO ASI120mm and AM5 mount

MrD

I have used a Celestron AVX mount with ASiair for a while. My guide scope is a 30mm with an ASI120mm. The guide settings were default; Calibration Step 2000 ; Max RA 2000 and Max RA 2000. Guiding was good. I now have a ZWO AM5 mount and guiding will not work. Error message dialogue boxes keep popping up. Can anyone advise as to the correct settings for Calibration Step, Max RA and Max Dec. Any advice / assistance gratefully welcomed.

bobequus

You are not using the calibration made on your AVX, are you? You will need to re-calibrate a new profile with the AM5 even though everything else is the same. If that is not the case, could you be more specific as to what the error messages are.
Bobby

MrD

Bobby,

Thank you. Next time the skies allow I will do that. I'll let you know how it
goes.
Thanks again