Serious Flat Frame issues - ASI1600MM-C - What am I doing wr

Focusers, Filters, Barlows etc..

Moderators: Sam, Sean.Wang

Re: Serious Flat Frame issues - ASI1600MM-C - What am I doin

Postby Sam » Tue Dec 26, 2017 9:04 am

pointofview_365 wrote:Sam, just so you know the new mask sent have issues. They're to big and the sides of the mask overlap the mask mounted next to each other. We've already tested this type of mask were the sides overlap, which still allow light to leak underneath. The good thing with your mask is them being made from a pastic type material. This adds rigidity, if we cut the overlap out they may accomplish the goal and lay flat against the wheel. The 3 tabs for the screw mount is perfect but reducing the outside diameter to fit within the filter area, in my case 36mm, would prove most beneficial easest


thanks for the feedback
yes, we know there is overlap and we thought it should stop the light
but seems we were wrong
we will try to fix in the future
and provide better screws
ZWO Founder
Location:lon=120.6 lat=31.3
SuZhou China
User avatar
Sam
 
Posts: 2456
Joined: Thu Feb 21, 2013 2:51 am

Re: Serious Flat Frame issues - ASI1600MM-C - What am I doin

Postby Sam » Tue Dec 26, 2017 9:05 am

szg wrote:Please see my experiment.

I use 31mm set purchased direct from your online store on October 2017.
Could you please make filter mask to help 31mm users too?


we are making 31mm mask
it can be ready soon
ZWO Founder
Location:lon=120.6 lat=31.3
SuZhou China
User avatar
Sam
 
Posts: 2456
Joined: Thu Feb 21, 2013 2:51 am

Previous

Return to Accessories

Who is online

Users browsing this forum: No registered users and 1 guest