Modify / Fix the ASCOM ASICamera Setup Driver

Moderator: Sam

Post Reply
jwaters125
Posts: 33
Joined: Sat Mar 31, 2018 11:13 pm

Modify / Fix the ASCOM ASICamera Setup Driver

Post by jwaters125 » Sat Mar 28, 2020 7:55 pm

The existing ASCOM ASICamera Setup Driver Gain scale goes from 0 to 100. All cooled ASI camera graphs on the ZWO website have a Gain scale from 0 TO 450. This is causing significant confusion...

Please modify / fix the ASICamera Setup Driver V 6.0.x Gain scale to match the published ZWO graphs.

Moson
Posts: 205
Joined: Wed Apr 01, 2020 8:28 am

Re: Modify / Fix the ASCOM ASICamera Setup Driver

Post by Moson » Thu Apr 09, 2020 8:01 am

We think the Gain sacle from 0 to 100 is enough.

u2pilotjt
Posts: 8
Joined: Wed May 02, 2018 4:12 am

Re: Modify / Fix the ASCOM ASICamera Setup Driver

Post by u2pilotjt » Fri Apr 17, 2020 11:39 am

Wow! That's a real customer-concerned response...not. How about attempting to find out what your customers need, what's easy to implement and what makes sense rather than throwing out a "screw you, we don't want to do that" type of answer. I've seen this type of response from ZWO before and it's not doing anything good for customer relations.

Moson
Posts: 205
Joined: Wed Apr 01, 2020 8:28 am

Re: Modify / Fix the ASCOM ASICamera Setup Driver

Post by Moson » Tue Apr 21, 2020 10:19 am

Thanks for your feedback, and I will convey your feedback to our devs and they will consider this.

Post Reply