Larger tilt adjuster to allow EFW and access to screws

Moderator: Sam

Post Reply
freestar8n
Posts: 12
Joined: Thu Jun 08, 2017 8:59 am

Larger tilt adjuster to allow EFW and access to screws

Post by freestar8n » Sun Jul 12, 2020 5:29 am

Hi-

I see you have an older T2 tilt adjuster and a new one - but neither one would allow access to the screws while attached to a filter wheel - with a larger cooled camera.

I would like a similar adjuster that is perhaps 2cm diameter larger than the asi1600 so that the screws could be on the camera side and just outside the camera body. Is there a reason you don't want the tilt adjuster larger than the camera body?

If the thickness can be the same 11mm as the T2 extender I think this would be a popular item.

Thanks,
Frank

User avatar
Support@ZWO
Posts: 795
Joined: Mon Apr 24, 2017 10:08 am

Re: Larger tilt adjuster to allow EFW and access to screws

Post by Support@ZWO » Tue Jul 14, 2020 9:12 am

Hi Frank,
Thanks for your suggestion and I have conveyed your message to our devs.
Location:lon=120.6 lat=31.3
Suzhou China

Post Reply