Debayer setup for ASI071 MC Pro?

ASI's Range of Specialised CMOS camera's

Moderators: Sam, Sean.Wang

Debayer setup for ASI071 MC Pro?

Postby bent » Wed Feb 14, 2018 5:25 pm

What demosaic setup should I use for the ASI071 MC Pro?
Attachments
Screen Shot 2018-02-14 at 9.10.44 AM.png
bent
 
Posts: 17
Joined: Tue Aug 15, 2017 4:22 am

Re: Debayer setup for ASI071 MC Pro?

Postby Sam » Tue Feb 20, 2018 2:23 am

071 use the same bayer pattern as 224
so you can have a look at this thread
https://bbs.astronomy-imaging-camera.co ... nebulosity
ZWO Founder
Location:lon=120.6 lat=31.3
SuZhou China
User avatar
Sam
 
Posts: 2479
Joined: Thu Feb 21, 2013 2:51 am

Re: Debayer setup for ASI071 MC Pro?

Postby bent » Tue Feb 20, 2018 10:00 pm

Thanks Sam. That was very helpful.

I came up with this Demosaic Setup:

I shot into a white piece of paper set closely in front of the camera without a lens. It was lit only by window daylight (~5500K) with the overhead lights turned off so there was no mixed lighting.

In Nebulosity, I then adjusted the rgb fractions in the "Manual Demosaic Setup" pop up window so that the debayered image had sampled pixels with close to equal amounts of red, green, and blue. This took repeated debayering of the test image to fine tune the color balance.

Of course, final color balancing would take place in post processing. This gets you in the ball park (I hope) for image capture and hopefully I won't have to do this again, or at least very often, with my 071 MC-Pro. Unfortunately, there are no clear skies in the forecast in the near future test things out.

Critiques of this technique are welcome.

Here is what I came up with:
Attachments
demosaic setup.jpeg
bent
 
Posts: 17
Joined: Tue Aug 15, 2017 4:22 am


Return to Cameras

Who is online

Users browsing this forum: No registered users and 3 guests