New ZWO ACI178MC Issues

ASI's Range of Specialised CMOS camera's

Moderators: Sam, Sean.Wang

New ZWO ACI178MC Issues

Postby b.bill.p » Fri Feb 09, 2018 9:07 pm

When I view an image, Sirius, The IMAGE in the ZWO is not centered as it is in the Explore Scientific 18/82 eye piece, the ZWO image SharpCap is very high and to the left. If I rotate the ZWO body the image will circle around center from the same distance (like a poorly aligned polar scope). My opinion is the Sensor is not centered in the body of the ZWO. This is a new purchase, should I return it for another or is there an adjustment ?

The second issue is that large translucent circle appear in LONG exposures and if the body of the ZWO is rotated so do these circles so the problem is in the image sensor.

Lastly there seems to be fuzz in the fish eye lens that becomes noticeable while adjusting the gain during setup.

On the plus side setting up the drivers in Windows 7 was easy and when the ZWO worked almost instantly on a Raspberry Pi-3 running AllSky I was super thrilled .

Please Advise , the ZWO was purchased from a major Southern California dealer. Bill P.
Posts: 3
Joined: Sun Jan 21, 2018 7:14 pm

Re: New ZWO ACI178MC Issues

Postby Sam » Tue Feb 20, 2018 1:58 am

you have to adjust the sensor precisely if you wish to use 178 as an all sky camera
this is because the all sky lens require the sensor in the exactly cente
ZWO Founder
Location:lon=120.6 lat=31.3
SuZhou China
User avatar
Posts: 2479
Joined: Thu Feb 21, 2013 2:51 am

Re: New ZWO ACI178MC Issues

Postby b.bill.p » Tue Feb 20, 2018 6:22 am

It is out of center using the 80 mm apeture telescope, Please send details to align the senser, if it is not possible then I should return the ZWO to the store. Thank you .....
Posts: 3
Joined: Sun Jan 21, 2018 7:14 pm

Return to Cameras

Who is online

Users browsing this forum: No registered users and 2 guests