ASI174MM Mini and anti-amp glow circuit

ASI's Range of Specialised CMOS camera's

Moderators: Sam, Sean.Wang

Post Reply
lmclouth
Posts: 2
Joined: Thu Oct 31, 2019 4:17 am

ASI174MM Mini and anti-amp glow circuit

Post by lmclouth » Thu Oct 31, 2019 10:40 am

Hello,

I'm trying to decide between purchasing your ASI174MM MIni or QHY's QHY5III-174M.

They both use the same sensor but theirs has a USB 3.0 interface and they have an anti-amp glow circuit.
I know your ASI174MM Mini uses USB 2.0, but does it have an anti-amp glow circuit?
(It would be nice to see some dark pictures from your camera at different exposures, like 1 sec to 5 secs.)

Are there other benefits of your product over the QHY?

Thank you for a thorough reply,

Lamar

Katherine.Tsai
Posts: 317
Joined: Fri Dec 07, 2018 10:24 am

Re: ASI174MM Mini and anti-amp glow circuit

Post by Katherine.Tsai » Fri Nov 01, 2019 10:33 am

ASI174 has anti amp glow circuit as well.

lmclouth
Posts: 2
Joined: Thu Oct 31, 2019 4:17 am

Re: ASI174MM Mini and anti-amp glow circuit

Post by lmclouth » Fri Nov 01, 2019 2:44 pm

When is the anti-amp glow circuit activated? For example, on exposures greater than 1 second?

Can you please post some dark exposures like 1 second through 10 seconds?
It would be nice to see how well the anit-amp glow circuit works and how clean the images are.

Thanks,

Lamar

Katherine.Tsai
Posts: 317
Joined: Fri Dec 07, 2018 10:24 am

Re: ASI174MM Mini and anti-amp glow circuit

Post by Katherine.Tsai » Tue Nov 05, 2019 9:16 am

The anti amp-glow is always on.
Sorry we do not have images here.

Post Reply