asi1600mm PRO tilt

ASI's Range of Specialised CMOS camera's

Moderators: Sam, Sean.Wang

Post Reply
alessandroRM
Posts: 3
Joined: Tue Oct 22, 2019 3:50 pm

asi1600mm PRO tilt

Post by alessandroRM » Wed Oct 23, 2019 10:15 am

I always used it with an esprit100 550mm f.5.5 refractor and with its original flattener, I always had a slight tilt problem, but it didn't bother me, for about 4 months I have a Riccardi flattener 0.75 f4 and I noticed a problem of tilting the sensor diagonally, last night I performed several tests and I discovered that if I focus on the lower left corner the opposite diagonal right corner is completely out of focus, I tried to rotate the camera but the fault always remains in the same corner, so I exclude both the pipe and the flattener.

alessandroRM
Posts: 3
Joined: Tue Oct 22, 2019 3:50 pm

Re: asi1600mm PRO tilt

Post by alessandroRM » Thu Oct 31, 2019 8:29 am

No answer or idea? doesn't ZWO technical support even have ideas?

Katherine.Tsai
Posts: 334
Joined: Fri Dec 07, 2018 10:24 am

Re: asi1600mm PRO tilt

Post by Katherine.Tsai » Fri Nov 01, 2019 10:32 am

Reason of Field Tilt problems and how to solve it
Hope this can help you.
https://astronomy-imaging-camera.com/faq

alessandroRM
Posts: 3
Joined: Tue Oct 22, 2019 3:50 pm

Re: asi1600mm PRO tilt

Post by alessandroRM » Sun Nov 03, 2019 12:20 pm

why in any way I mount the filter wheel does the camera never come on board with the engine?
and the flanges of the oag are practical to the limit?
for my tilt problem, is there a problem with wheel threads?
and I can't lower the oag because it beats on the filter wheel
IMG_8620.JPG
IMG_8619.JPG
IMG_8616.JPG

Katherine.Tsai
Posts: 334
Joined: Fri Dec 07, 2018 10:24 am

Re: asi1600mm PRO tilt

Post by Katherine.Tsai » Wed Nov 06, 2019 8:17 am

We will follow up the problem via emails.

Post Reply